HP Switche

HP Pro Curve 2610-48 (J9088A)

Optionales Zubehör

• 2610 Series

Description	Name	OID
Transceivers	HP ProCurve 100-FX SFP-LC transceiver	J9054B
Transceivers	HP ProCurve 100-BX-D SFP-LC transceiver	J9099B
Transceivers	HP ProCurve 100-BX-U SFP-LC transceiver	J9100B
Power supply	HP ProCurve 600 redundant external power supply	J8168A
Power supply	HP ProCurve 610 external power supply	J8169A
Mini-GBICs	HP ProCurve Gigabit-SX-LC Mini-GBIC	J4858C
Mini-GBICs	HP ProCurve Gigabit-LX-LC Mini-GBIC	J4859C
Mini-GBICs	HP ProCurve Gigabit-LH-LC Mini-GBIC	J4860C
Mini-GBICs	HP ProCurve Gigabit 1000Base-T Mini-GBIC	J8177C
Mini-GBICs	HP ProCurve 1000-BX-D SFP-LC Mini-GBIC	J9142B
Mini-GBICs	HP ProCurve 1000-BX-U SFP-LC Mini-GBIC	J9143B

Terminal Settings

• Symbolrate von 1200 bis 115200 (default 9600)
• 8 data bits
• 1 stop bit
• no parity
• flow control set to Xon/Xoff

screen /dev/cu.usbserial 9600,cs8,-parenb,-cstopb,-clocal

Firmware

• https://h10145.www1.hp.com/downloads/ProductsList.aspx?lang=&cc=&prodSeriesId=

copy flash tftp <ip-adress-tftps> <filename>                          // Aktuelle Firmware auf den tftp schieben
copy tftp flash <ip-adress-tftps> <filename> <primary|secondary>      // Neue Firmware vom tftp holen  
boot system flash <primary|secondary>                                 // Switch reboot mit pri bzw sec image          

Befehlssammlung

Ein paar Schnipsel

show version                 
show flash
show config             
show running-config
show config status

show vlans
show trunks
show lacp
show lldp info remote-device
show cdp neighbors

Folgende Befhle im "(config)#" Mode

hostname deepthought                                // Neuen Hostnamen vergeben
password all                                        // Passwort für Operator & Manager setzen

time timezone 60                                    // Zeitzone einstellen
time daylight-time-rule Western-Europe              // Sommer- / Winterzeitzone einstellen
sntp server 5.9.156.53                              // 0.pool.ntp.org
sntp server priority 1 5.9.156.53                   // 0.pool.ntp.org                              
sntp server priority 2 5.9.80.113                   // 1.pool.ntp.org
sntp server priority 3 78.47.249.19                 // 2.pool.ntp.org

ip default-gateway 192.168.23.1     
snmp-server community "public" manager restricted      
crypto key generate ssh   
ip ssh

no web-management plaintext
no telnet-server

exit                                                 // (conf) verlassen um
write memory                                         // running-config als startup-config abzuspeichern

SNMP

OID`s

Description	Name	OID	Type	Value (Example)
MIB-2		.1.3.6.1.2.1		-
System		.1.3.6.1.2.1.1		-
System description	sysDescr.0	.1.3.6.1.2.1.1.1.0	OctetString	""ProCurve J9088A Switch 2610-48...."
System uptime	sysUpTime.0	.1.3.6.1.2.1.1.3.0	TimeTicks	"Timeticks: (9400662) 1 day, 2:06:46.62"
System contact	sysContact.0	.1.3.6.1.2.1.1.4.0	OctetString	"your@email.tld"
System name	sysName.0	.1.3.6.1.2.1.1.5.0	OctetString	"switch_23"
System location	sysLocation.0	.1.3.6.1.2.1.1.6.0	OctetString	"Rack 3"
Interfaces		.1.3.6.1.2.1.2		-
IP		.1.3.6.1.2.1.4		-
ICMP		.1.3.6.1.2.1.5		-
TCP		.1.3.6.1.2.1.6		-
UDP		.1.3.6.1.2.1.7		-
SNMP		.1.3.6.1.2.1.11		-
Enity MIB		.1.3.6.1.2.1.47		-
Firmware Version (primary)	entPhysicalFirmwareRev	.1.3.6.1.2.1.47.1.1.1.1.10.1	OctetString	"R.11.107"
Firmware Version (secondary)	entPhysicalFirmwareRev	.1.3.6.1.2.1.47.1.1.1.1.9.1	OctetString	"R.10.06"
Serial Number	entPhysicalSerialNum	.1.3.6.1.2.1.47.1.1.1.1.11.1	OctetString	"CN821****"
SEMI-MIB (HP)		.1.3.6.1.4.1.11		-
MAC Address	?	.1.3.6.1.4.1.11.2.14.11.1.2.1.0	OctetString	"aa-bb-cc-dd"
Fan	?	.1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.1	Integer	"4"
Power Supply 1	?	.1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.2	Integer	"4"
Power Supply 2	?	.1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.3	Integer	"5"
Over Temperature	?	.1.3.6.1.4.1.11.2.14.11.1.2.6.1.4.4	Integer	"4"
Memory Free	?	.1.3.6.1.4.1.11.2.14.11.5.1.1.2.1.1.1.6.1	Integer	"73556512"
CPU	?	.1.3.6.1.4.1.11.2.14.11.5.1.9.6.1.0	Integer	"4"
System IP Address	hpHttpMgEntityNetInfoIPAddress	.1.3.6.1.4.1.11.2.36.1.1.3.1.1.7.1	OctetString	"192.168.23.23"
HP Global Unique ID	hpHttpMgDeviceGlobalUniqueID	.1.3.6.1.4.1.11.2.36.1.1.5.1.1.2.1	OctetString	"HPJ9088ACN821*****"

HP Status Werte

• 1 unknown
• 2 bad
• 3 warning
• 4 good
• 5 not present